Sleek, low-maintenance powder-coated aluminum with the strength and corrosion resistance to take on any climate, plus a modern look in a range of colours. As an authorized Innovative Aluminum Systems dealer, we build to a finish that lasts through Washington winters.
Supplied & installed across Washington State · Based in Yakima
Typical spec
- Finishes
- 14 standard colours + custom
- Height
- 36″ or 42″, custom available
- Post spacing
- Varies
- Mounting
- Surface, fascia or core
- Infill
- Rejects a 4″ sphere
Exact spec is set per project and confirmed in your quote.
Five ways to build it in aluminum, all on the same engineered post and rail platform, so you can mix styles across one project without it looking pieced together.
The classic. Slim square pickets under a continuous top rail, clean on craftsman and contemporary homes alike, and the friendliest price point.
Strong, modern lines that make decks feel wider. A favourite on view homes and new construction across the valley.
Evenly spaced square pickets between aluminum posts and a continuous top rail. A timeless, secure guard that reads clean on classic and modern homes alike.
Slim vertical pickets topped with a row of decorative rings, set between aluminum posts and a continuous top rail. A refined accent that dresses up decks and stairs alike.
Shaped basket pickets bow out from the wall and close over a woven metal floor, a true balconet rather than a flat guard. A decorative statement beneath French doors and upper-storey windows.
Real installations across Washington. Click any photo to look closer.
Won't rust or rot
Marine-grade aluminum resists corrosion in coastal and high-rainfall climates without ongoing upkeep.
Engineered connections
Concealed, tested fasteners and continuous top rails keep every run rigid and quiet underfoot.
Slim sightlines
Narrow pickets and posts keep the view open while meeting guard requirements.
Low maintenance
An occasional rinse is all it takes, no sanding, staining, or repainting.
Finishes & colours
14 standard powder-coat colours, from warm whites to matte blacks. Custom colours on request.
- Black
- Textured Black
- White
- Phantom Bronze
- Silver Matte
- Sparrow Grey
- Coastal Grey
- Sandalwood
Where it goes
- Decks & balconies
- Stairs & landings
- Rooftop terraces
- Walkways & ramps
Code compliance
Designed and installed to meet Washington State Residential and Building Code guard requirements, typically 42" guard height with infill that rejects a 4" sphere.
Straight answers about the railings we build and install. If yours isn’t here, it’s a two-minute phone call.
Prefer to ask a person? (206) 683-7316, we pick up.
Not for a long time. Our powder-coat finish is baked on, UV-stable, and far tougher than paint. It carries a finish warranty of up to 20 years* against peeling, cracking, and fading, so the colour you pick stays the colour you see. *The full 20-year term applies to inland jobs. Coastal and salt-air exposure carries a shorter term, as low as 10 years.
Aluminum gives you the same clean profile without the rust. Iron and steel need sanding and repainting every few years in our climate; powder-coated aluminum needs an occasional rinse. It's also lighter, which means less stress on your deck framing.
Almost always, yes. We install on wood, composite, and concrete. During the free consultation we check that your framing or slab can take the guard loads, and if it needs blocking or reinforcement, we'll tell you before you spend a dollar.
Residential guards in Washington are typically 36 inches minimum, with 42 inches required in many multi-family and commercial settings. We design every run to the code that applies to your specific project, including the 4-inch sphere rule for infill spacing.
Most residential aluminum projects install in one to two days once fabrication is complete. From design approval to finished railing is typically three to five weeks.
Ready for aluminum railings?
Book a free consultation. We'll measure, design your railing in 3D on your real plans, and give you an exact, itemized price.